Tag: screen printing denver

How To Use White Ink And Screen Print Technique?

When you print white shirt through mesh sizes then you should be starting from 110-156. Sometimes the image fixes upon the mesh that is equal to the full size. For example, halftones or fine line images cannot hold the mesh screen lower, you must use a high mesh frame and apply more trajectories to reach the white part.

But for the most part, if you want to use a lower snare so, that a large amount of ink is used on the shirt. If you are looking for screen printing from Denver Company then you can have a peek here milehighathleticapparel.com/screen-printing/.

The second part of the arrangement is to make sure the screen is adjusted correctly on the press. You want to make sure you have the right contact around 1/8-1/16 inches.

Because white is slightly thicker, you might want to use contacts that are slightly higher than usual, maybe around 1/8 of an inch. Inactive contacts are the height between the mesh screen and the media you use to print.

The correct contact also allows the ink to be cleaned from the screen gauze easily by removing the gauze up directly after the print step leaving all the ink smoothly on the shirt. One thing you also want to be sure to apply when printing white ink is the contact tab.

This is a small piece of material (e.g. a penny, cardboard, paper, a piece of plastic) which is the height of your inactive contact. This tab is placed at the end of the screen frame where it touches the top of the neck plate and not on the shirt.

Using the inactive contact tab, you make sure that your contacts are inactive you will continue through the entire print step.